Mulberry Design + Print | Sign Vinyl - Application Tape

Helps You Cut Most Substrates
The Zapkut is ideal for cutting plastics, non-ferrous metals and timber. With the panel saw cutting Correx and Dibond is quick and straight forward and because it is a panel saw your cut will always be 100% straight and accurate. The Zapkut can take full 8x4 foot sheets (2440x1220mm) and with most substrates you can cut multiple sheets in one pass.

2 Cuttings Methods
With the Zapkut you can cross cut and rip cut.

Vertical Cutting (Cross Cut)
The head of the saw is moved from top to bottom using the integral guide rail system.

Horizontal Cutting (Rip Cut)
Simply disengage the saw mounting plate and rotate the plate by 90 degree and re-engage. This will allow you then to cut horizontally. You would use this method for cutting the full length of an 8 foot board.

Sturdy Yet Portable
The Zapkut is a vertical panel saw that is not only sturdy it is also portable as it can fold down for easy transportation on-site.

Safer
Most sign makers use hand-held circular saws and trestles, or table saws. Both approaches are hazardous, and can be slow, inaccurate, and messy. The Zapkut is safer by ensure the blade is well away from your body.

Cleaner
Whilst cutting any material is always going to involve some mess you can utilise the dust extraction attachment that features on most circular saws to cut the waste mess down by 50%.

Easy To Set Up
Quick and easy to deploy and stow. Just fold out and lock into place using the 2 locking bolts.

Cost Effective
At just £895+VAT the Zapkut is exceptional value for money.

Zapkut ZK8
	Size When Open	Size When Closed
Length	2800mm / 110 inch	780mm / 31 inch
Depth	700mm / 28 inch	230mm / 9 inch
Height	1900mm / 75 inch	1900mm / 75 inch

Weight	31.5Kgs / 70 Lbs
Accepts Blades	184-190mm / 7¼ - 7½ inch

To order the Zapkut Panel Saw

Please note that the Zapkut does not include a circular saw. The Zapkut panel saw has a mounting plate which can be customised to fit most circular saws. Some of the most popular that it fits include;

Bosch GKS65
Makita 5704RK
Hitachi C7SB2
Hitachi C7U2
DeWalt 23650 (non guide rail version)

The saws mentioned above are just over the £100 mark from companies such as Screwfix, Tool Station etc.

If you have these or an alternative existing saw with a metal base plate you can customise the saw holder that comes with the unit. This requires drilling of 4 holes in the base plate and saw holder to allow the saw fixings to be attached.

To order the Zapkut Panel Saw

To download the Zapkut Brochure click here
If you do not have Adobe Acrobat Reader installed on your computer you can download it by clicking the link below.

All prices shown are ex VAT

Home | Products | Customer Info | Contact | Terms and Conditions